What Your Need to Know About Metalizing Paint
Basically, the process of administering specific metallic coating on top of a substrate is called metalizing paint or thermal spray coating; this is done to ensure that the material has added protection from physical wear or corrosion. Alloys, aluminium and zinc the metals typically used in the process. The metals are heated electronically, or with the traditional way of flaming, and are sprayed right on top of the substrate; by this time, the substrate has already gone through proper surface preparation.
Any metal or concrete can go under the process of metalizing as long as it can withstand the force of being cleaned and blasted before the actual application; it is required as the surface preparation. Marine coating are the most effective when pure aluminum or zinc-aluminum is used in the metalizing paint. Metalizing paint is usually applied on to onshore and offshore facilities like piers, bridges, locks and dams. Know more about shielding spray.
Benefits or Metalizing Paint
Metalizing paint and its entire application process does not make use of solvents, hence no VOCs (volatile organic compounds) are emitted. For the past couple of years, environmental regulations regarding VOC emissions have gradually become stricter; a lot of owners and painters and looking into options for limiting and decreasing their overall VOC output. As a result, metalizing has gained popularity and aside from containing no traces of solvents, metalizing projects do not require cure times. As soon as an asset completes the metalizing process, it can be put back in service; this is a major advantage for establishments that incurs losses when these down times happen. You may also watch and gather more ideas about painting at https://www.youtube.com/watch?v=lRiqKXotFgk.
Regardless of the surrounding environment, the metalizing process can still be facilitated; unlike all the other paint-based coatings, the metals used in this process can be applied no matter how hot the temperature is or how humid the place may be. So as another advantage metalizing projects can be done whatever the seasons or whether might be, may it rains cats and dogs or the heat of the sun becomes too much and everything in between; the only real concern will be the safety of the workers.
Even though metalizing is often compared to hot-dip galvanisation due to a handful of similarities, metalizing still has advantages over the other process. The initial advantage is that metalizing is a better solution for bigger structures thanks to the spray application that it uses; even though deconstruction is not all the cost-effective or possible. Substrates remain cooler under metalizing as compared with hot-dip galvanisation so there is no real risk of damage or distortion to the substrate.